Zanussi ZHC 916X User Manual

Page 16

Air outlet directed upwards (Fig. 2a-b):

Remove the plastic plug from the upper part of
the venting grill and replace it on the rear part (Fig.
16).

Air outlet directed towards the wall (Fig. 3):

Remove the plastic frame from the air outlet (Fig.
17).

Remove the plug from the upper part of the ducting
fan unit (Fig. 18), as it is not possible to insert the
flange F with the plug in place.

Fit the flange F Ø 120 or 150 mm (Fig. 19), replace
the plug.

Air outlet directed to the left or right hand side (Fig. 4a-
b):

Remove the four screws fastening the plastic fra-
me, as shown in Fig. 17.

Fit the ducting spigot R (Fig. 20) and replace the
four screws removed as above.

INSTALLATION INSTRUCTIONS