Yamaha MSP5 - Manual (Page 4)

4
VOL
2 1
1 Power indicator
This indicator lights up when you turn the POWER
switch ON.
2 VOL (Volume) control
This control knob enables you to adjust the overall
sound volume. Rotating the control counter
clockwise lowers the volume level. Rotating it
clockwise raises the volume level.
CAUTION
TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO
WIDE SLOT, FULLY INSERT.
2
3
1
NEUTRIK
LINE 1
INPUT TRIM
LINE 2 HIGH LOW POWER
ON
OFF
–2 –1 0 +1 –1 0 +1
3 4 5
3 POWER switch
This switch turns the power to the MSP5 on and
off. When you turn this switch on, the green
power indicator on the front panel lights up.
4 TRIM switches
These switches enable you to adjust the bass and
treble for the MSP5.
LOW: four positions
The LOW switch adjusts the bass range. With the
“+1” setting, the bass range is boosted by 1.5 dB.
With the “–1” and “–2” settings, the bass range is
cut by 1.5 dB.
(See performance graph.)
HIGH: three positions
The HIGH switch adjusts the treble. With the “+1”
setting, the treble range is boosted by 1.5 dB. With
the “–1” setting, the treble range is cut by 1.5 dB.
(See performance graph.)
5 INPUT jacks
LINE 1
This is an XLR-type jack used to connect a bal-
anced.
LINE 2
This is a monaural phone jack used to connect an
unbalanced line output.
Front panel/Rear panel