Yamaha CDX-10 - Manual (Page 17)

17
English
1
Load the disc.
2
Load a tape on the tape deck.
*
The peak level search function of this unit is useful
for adjusting recording level on the tape deck. (Refer
to page 16.)
3
This unit enters into the pause mode, and the tape deck
enters into the REC/PAUSE mode.
* In this mode, the time display on this unit flashes on and
off.
4
If necessary, select a desired track.
5
Both CD play and tape deck recording begin.
* CD play begins a little later than recording.
6
If you want to stop recording temporarily and restart
recording from a desired track, follow steps 3–5 again.
To cancel this function
Press the STOP button.
Notes
• To finish or stop the recording, make proper operations on
the tape deck.
• Programmed sequence of tracks can also be recorded with
this function, instead of recording an entire disc. (Refer to
page 11–12 for the programming procedure.)
• This function can also be used together with the automatic
tape-programming function. (Refer to page 13–15.)
This unit can make a tape deck’s recording synchronized with CD play automatically. With this function, you can record a CD on
tape very easily and more precisely.
This recording method needs a YAMAHA tape deck compatible with this function. (Refer to the tape deck’s operation manual to
know whether it is compatible or not.)
* This unit and the tape deck must be placed close to each other so that both of them can receive the signals from this unit’s
remote control transmitter at the same time.
PLAY
SYNCHRO
CD SYNCHRONIZED RECORDING
OPEN/
CLOSE
10
DIMMER TIME
OPEN/
CLOSE
PROG CLEAR
SPACE S/F RANDOM
REPEAT
1 2 3
4 5 6
7 8 9 0
+
SKIP PLAY PAUSE
SEARCH STOP INDEX
TAPE PEAK
SYNCHRO
5
3
1
4
4
5
SKIP
or