beautypg.com

Storage, Disposal, Warning 8. maintenance – Zenoah HTZ2401L EU User Manual

Page 40

background image

40

1. Oil the blade to prevent rust.
2. Empty the fuel tank and put the cap back on.
3. Remove the spark plug, pour a small amount of oil

into the cylinder.

4. Rotate the crankshaft several times using the

starting rope in order to distribute the oil. Put the
spark plug back in.

5. Wrap the engine with a plastic sheet.
6. Store the trimmer indoors in a dry place, dust free

place, out of the reach of children, preferably not in
direct contact with the floor and away from heat
sources.

9. Storage

English

10. Disposal

English

• When disposing your machine, fuel or oil for the

machine, be sure to allow your local regulations.

ANTI-VIBRATION SYSTEM

The deformed or damaged anti-vibration system may
cause of the breakages like getting rickety or falling off
of engine and/or blade.

• [HTZ2401/HTZ2401-CA] Check periodically if the

rubber cushions are not deformed or damaged.

• [CHTZ2401/CHTZ2401-CA] Check periodically if the

springs are not deformed or damaged.

PROCEDURES TO BE PERFORMED AFTER

EVERY 100 HOURS OF USE

1. Remove the muffler, insert a screwdriver into the

vent, and wipe away any carbon buildup. Wipe away
any carbon buildup on the muffler exhaust vent and
cylinder exhaust port at the same time.

2. Tighten all screws, bolts, and fittings.
3. Check to see if any oil or grease has worked its way

in between the clutch lining and drum, and if it has,
wipe it away using oil-free, lead-free gasoline.

WARNING

8. Maintenance

English

This manual is related to the following products: