Set up – Zenoah PSZ2500 User Manual

Page 16

Text mode
Original mode

16 

6. Set up

5. Tighten the mounting nut securely with the

bar tip held up (SE8)(TORQUE: 8.9~11.7
N.m./90~120 kg-cm). Then check the
chain for smooth rotation and correct
tension while moving it by hand. If
necessary, readjustment.

(1) Tighten

It is very important to maintain the proper
chain tension. Rapid wear of the guide
bar or the chain coming off easily can be
caused by improper tension. Especially
when using a new chain, take good care
of it since it should expand when first
used.

■ BALANCE UNIT
1. Put on strap and attach unit to strap.
2. Depending on the working posture, slide

clamp up or down until unit balances and
the strap fits your body.

WARNING

SE8