Levelling the appliance, Ventilation requirements – Zanussi ZRB 2641 User Manual
Page 16
16
Levelling the Appliance
When placing the appliance ensure that it stands level.
This can be achieved by adjusting either or both of the
feet (1) at the front of the appliance. If required the
washers (2), that are accessories of the feet, can be
removed.
Do not stand the appliance next to a source of heat
such as a radiator or cooker.
Ventilation Requirements
The appliance must have adequate ventilation to
ensure correct operation.
Diagram shows the ventilation requirements when
installed:
A Under a cupboard.
B When freestanding
100mm
min.
15mm
A
B
See also other documents in the category Zanussi Freezers:
- ZU 7120 F (20 pages)
- ZCF 310 (11 pages)
- ZU 9120 F (20 pages)
- ZBF 11420 SA (40 pages)
- ZQF 11430 DA (40 pages)
- ZFC 11 JE (16 pages)
- ZFC 11 JE (12 pages)
- ZFC 26 JE (20 pages)
- RS13FW2F (3 pages)
- ZFC 389 S (6 pages)
- 113182 (4 pages)
- BCF180DA (5 pages)
- ZBF 6114 (20 pages)
- IMF35A (2 pages)
- CIM50A3 (5 pages)
- CIM29A3 (2 pages)
- U28059 ZFC 177 C (16 pages)
- TRF183AE (4 pages)
- ZRB 2630 W (20 pages)
- TRF132A (4 pages)
- Z1921/8 FFA (20 pages)
- 726690 (5 pages)
- CIM67A (5 pages)
- ZFC 35 SI (12 pages)
- ZUT 6246 (16 pages)
- ZEC 30 (15 pages)
- ZEF 90 W (16 pages)
- U30456 ZFC 50 JC (8 pages)
- ZRB 2725 W (20 pages)
- RCSF3M22 (4 pages)
- ZFC 632 WAP (8 pages)
- ZFC 321 WB (12 pages)
- CIM143WS3 (2 pages)
- ZV 45 RAL (16 pages)
- ZERT 2170 (16 pages)
- IMF250AB20 (2 pages)
- 728636 (4 pages)
- ZEF 55 W (16 pages)
- ZRB 2825 W (20 pages)
- ZRD 1843 (20 pages)
- ZUT 125W (20 pages)
- ZCF 94 C (16 pages)
- ZRB 2530 S (20 pages)
- ZUC 053W (16 pages)
- ZNB 404 W (24 pages)