Specifications, General specifications, Speaker unit – Yamaha SW500 User Manual
Page 6: Amp. unit, Dimensions, General specifications speaker unit amp. unit
6
Specifications
General specifications
Type
Bass Reflex powered subwoofer
Frequency Range
40–120 Hz (–10 dB)
Maximum Output Level
122 dB (1 m on Axis)
Dimensiones (W
×
H
×
D)
480
Ч
619
Ч
590 mm
Weight
37 kg
Installation pole diameter
35 mm (1.375”)
Accessories
Power cable 2.5 m (AC inlet type)
Speaker unit
Speaker Unit
38 cm cone (8
Ω
)
Enclosure
Type: Bass Reflex
Amp. unit
Maximum Output Power
500 W at 100 Hz, THD=1%, RL=8
Ω
650 W at 100 Hz, 20 ms nonclip RL=8
Ω
Input Sensitivity/Impedance
+4 dB/30 k
Ω
(channels A and B)
Controls
LEVEL Control
CUTOFF FREQ. Control: 80–100 Hz (Variable)
PHASE Switch: (REV/NORM)
POWER Switch: ON/OFF
Connectors
INPUT A ,B (XLR-3-31), OUTPUT THRU A, B (XLR-3-32)
OUTPUT HIGH PASS A ,B (XLR-3-32)
Power Indicator
Green LED
Clip Indicator
Red LED
Power Requirement
USA and Canada: AC 120 V, 60 Hz
Europe: AC 230 V, 50 Hz
Others: AC 240 V, 50 Hz
Power Consumption
200 W
★
0 db=0.775 V
For European Model
Purchaser/User Information specified in EN55103-1
and EN55103-2.
Inrush Current: 70 A
Conformed Environment: E1, E2, E3 and E4
Specifications and appearance are subject to change
without notice.
Dimensions
619
Unit: mm
250
480
590