Zanussi ZKT 863 LX - Manual (Page 18)

18
Uses, tables and tips
Pans
• You can recognise good pans by their bases. The
base should be as thick and flat as possible.
• Pay particular attention when buying new pans to
the diameter of the base. Manufacturers often give
only the diameter of the upper rim.
• Pots with aluminium or copper bases can cause
metallic discolouring on the ceramic glass surface,
which is very difficult or impossible to remove.
• Do not use cast iron pans or pans with a rough,
burred or damaged base. This can produce perma-
nent scratching if the pan is slid across the sur-
face.
• When cold, pan bases are normally bowed slightly
inwards (concave). They should never be bowed
outwards (convex).
• If you wish to use special types of pan (e.g. a pres-
sure cooker, simmering pan, wok, etc.), please ob-
serve the manufacturer's instructions.
2
Energy saving tips
• Always position pots and pans before switching on
the cooking zone.
• Whenever possible always position the lids firmly
on pots and pans to cover completely.
• Switch off the cooking zones before the end of the
cooking time to use the residual heat such as to
keep foods warm or for melting.
• The base of the pan should be the same size as
the cooking zone.