X-Micro Tech. WLAN 11b Access Point - Manual (Page 7)

USER’S MANUAL OF X-Micro WLAN 11b ACCESS POINT Version: 2.0
1.5 Rear Panel Description
Antenna
Power
Reset LAN
Figure 2 – X-Micro WLAN 11b Access Point Rear Panel
Interfaces Description
1. Reset Push continually the reset button 5 seconds to reset the configuration
parameters to factory defaults.
2. Power The power jack allows an external DC +7.5 V power supply connection.
The external AC to DC adaptor provide adaptive power requirement to the
WLAN AP.
3. LAN The RJ-45 socket allows LAN connection through a Category 5 cable.
Support auto-sensing on 10/100M speed and half/ full duplex; comply with
IEEE 802.3/ 802.3u respectively.
4. Antenna The Wireless LAN Antenna.
3