Yamaha DSP-A590 - Manual (Page 12)

12
1
Set to the “
∞
” position.
2
Select the front speakers to be used.
* If you use two front speaker systems, press both the A
and B switches.
3
Set to the “0” position.
4
5
Select the PRO LOGIC or PRO LOGIC
ENHANCED mode, so that the corresponding name is
illuminated on the display.
SPEAKER BALANCE ADJUSTMENT
This procedure lets you adjust the sound output level balance between the front, center, and rear speakers using the built-in test
tone generator. With this adjustment, the sound output level heard at the listening position will be the same from each speaker.
This is important for the best performance of the digital sound field processor.
The adjustment of each speaker output level should be done at your listening position with the remote control transmitter.
Otherwise, the result may not be satisfactory.
5 1 4
2 3
SPEAKERS
A B
ON
OFF
ON
OFF
BASS
5 5
4
3
2
l
0
l
2
3
4
TREBLE
5 5
4
3
2
l
0
l
2
3
4
BALANCE
5 5
4
3
2
l
0
l
2
3
4
L R
POWER
TAPE MON DIR B PLAY DIR A REC PAUSE
LD/TV STOP TEST
VCR 1 CNCT VIDEO ENHANCED PRO LOGIC
VCR 2 DISCO STADIUM MONO MOVIE CENTER LEVEL
V AUX
EFFECT
ON/OFF HALL ROCK
VOLUME REAR
LEVEL
SUR.
DELAY TIME
5
DISCO
ROCK
CONCERT
CONCERT
HALL PRO LOGIC ENHANCED
CONCERT
VIDEO
MONO
MOVIE
STADIUM EFFECT