Zanussi ZWQ 6120 - Manual (Page 5)

the “Start/Pause” pushbutton flashes red for a few
seconds.
Selecting the spin speed
Press the “ Spin ” pushbutton to change the spin speed.
The maximum spin speeds are :
for Cottons , Jeans : 1200 rpm (ZWQ 6120), 1000 rpm
(ZWQ 6100), for Handwash , Wool : 1000 rpm (ZWQ
6100), 900 rpm (ZWQ 6120), for Synthetics , Sport :
900 rpm, for Delicates , Curtains : 700 rpm.
At the end of the programme, if you have selected
“ Rinse hold ” , you then need to select a “ Spin ”
or “ Drain ” programme to finish the cycle and
empty the water.
Selecting options
You must select the different options after selecting the
programme and before pressing the “Start/Pause”
pushbutton (see “Programme table”). Press the desired
button(s) ; the corresponding lights come on. If pressed
again, the lights go out. If one of the options is not com-
patible with the selected programme, “Err” flashes on
the display and the “Start/Pause” pushbutton flash-
es red.
“Prewash” option
The appliance runs a prewash at 30°C max.
“Quick” option
The washing time will be reduced depending on the pro-
gramme selected.
“Eco” option
This option allows you to choose a lower temperature
programme which is as effective as a higher tempera-
ture wash programme.
“Easy iron” option
If you select this option, the laundry is washed and
spun delicately to prevent any creasing. This makes iron-
ing easier.
“ Rinse plus ” option
The washing machine will add one or more rinses dur-
ing the cycle. This option is recommended for people
with sensitive skin and in soft water areas.
Temporary : Press the “ Rinse plus ” pushbutton.
The option is only active for the selected programme.
Permanent : Hold down the “ Eco ” and “ Rinse
plus ” pushbuttons for a few seconds. The option is
permanently activated, even if the appliance is switched
off. To deactivate it, repeat the process.
“Delay start”
This option allows you to delay the start of a wash pro-
gramme by 30, 60, 90, 2 hours to 20 hours. The selec-
ted time appears on the display for a few seconds.
You can change or cancel the delayed start time at any
time before you press the “Start/Pause” pushbutton,
by pressing the “Delay start” pushbutton again (0’
indicates immediate start).
If you have already pressed the “Start/Pause” push-
button and you want to change or cancel the delayed
start, proceed as follows :
• To cancel the delayed start and start the cycle imme-
diately, press “Start/Pause” and then “Delay
start” . Press “Start/Pause” to start the cycle.
• To change the timer delay period, you must go
through the “Stop” position and reprogramme
your cycle.
The lid will be locked during the delayed start time. If
you need to open it, you must first pause the appliance
by pressing the “Start/Pause” pushbutton. After clos-
ing the lid again, press the “Start/Pause” pushbutton.
Start of the programme
Press the “Start/Pause” pushbutton to start the cy-
cle ; the corresponding light will come on green. The
indicator lights up (door locked). It is normal for
the programme selector to remain stationary during the
cycle. The remaining time appears on the display. If a
delayed start has been selected, the countdown appears
on the display.
Interrupting a programme
Adding washing during the first 10 minutes
When the
light is off, you can add washing by pro-
ceeding as follows. Press the “Start/Pause” pushbut-
ton : the corresponding light will flash green while the
appliance is paused. The lid can only be opened around
2 minutes after the washing machine has come to a
stop. Press the “Start/Pause” pushbutton again to
continue the programme.
Modifying the programme in progress
Before making any changes to the current programme,
you need to pause the washing machine by pressing the
“Start/Pause pushbutton. If the modification is not
possible, “Err” flashes in the display and the “Start/
5