Zoom R24 - Manual (Page 12)

11
A
u
d
io i
nt
er
fa
ce m
an
u
al
Fader section operation
Using the faders and status keys of the fader section, you can adjust the volume of
corresponding Cubase LE 5 tracks, mute and solo them, and arm them for recording.
Operating the fader section
1
Assign the Cubase LE 5 tracks
(channels) that you want to control
to the fader section.
About banks
After setting up control surface operation, the
main parameters of Cubase LE 5 can be oper-
ated using the R24’s fader and status keys.
A group of tracks operated by the faders and
status keys is called a “bank.” With the R24,
one bank of 8 adjacent tracks can be con-
trolled.
For example, if fader 1 is assigned to Cubase
LE 5 track 1, tracks 1-8 can be controlled as
shown in the following diagram.
Control 1 2 3 4 5 6 7 8
Track Tr 1 Tr 2 Tr 3 Tr 4 Tr 5 Tr 6 Tr 7 Tr 8
As the diagram shows, when tracks 1~8 are
selected, pressing the [9~16tr (Bank>)] key
once switches the assignments as shown be-
low.
Control 1 2 3 4 5 6 7 8
Track Tr 9 Tr 10 Tr 11 Tr 12 Tr 13 Tr 14 Tr 15 Tr 16
1~8Tr (< BANK) key
Tracks (channels) assigned to the fader section are
moved backward by eight tracks.
9~16Tr (BANK >) key
Tracks (channels) assigned to the fader section are
moved forward by eight tracks.
2
Use the faders to control the
volumes of the corresponding
tracks.
The faders control the volumes of their re-
spective tracks. Change the master volume
by moving the [Master] Fader.
3
To change the function of the
status keys for all the tracks,
press the soft key for the desired
function.