Cinema-dsp programs, For movie programs: no. 9 to 11 – Yamaha DSP-AX3200 User Manual

Page 36

CINEMA-DSP

CINEMA-DSP Programs

■ For movie programs: No. 9 to 11

According to the input signal format, this unit automatically chooses the appropriate decoder and DSP sound field
pattern.

Table of Program Names for Each Input Format

MOVIE
THEATER 1

MOVIE
THEATER 2

DOLBY
DIGITAL

DTS DIGITAL
SUR

PRO LOGIC

DTS Neo: 6

2 channel

Stereo

70 mm Spectacle

70 mm Sci-Fi

70 mm Adventure

70 mm General

—

Normal

Enhanced

Movie

Music

Cinema

Music

DOLBY DIGITAL

DGTL Spectacle

DGTL Sci-Fi

DGTL Adventure

DGTL General

Normal

Enhanced

—

5.1 channel

DTS

DTS Spectacle

DTS Sci-Fi

DTS Adventure

DTS General

—

Normal

Enhanced

—

DTS ES

Spectacle ES

Sci-Fi ES

Adventure ES

General ES

—

ES Matrix 6.1

ES Discrete 6.1 *

Enhanced ES

—

6.1 channel *

Input

Program

DOLBY DIGITAL

Spectacle 6.1

Sci-Fi 6.1

Adventure 6.1

General 6.1

Matrix 6.1

Enhanced 6.1

—

*1 means the 6.1/ES decoder is ON.
*2 means the DTS ES software encoded with Discrete 6.1 is input.

• If a Dolby Digital signal or DTS signal is input when the input mode is set to AUTO, the DSP program will be automatically

switched to the Dolby Digital playback sound field or DTS playback sound field.

• If Dolby Digital Surround EX software or DTS ES software is played when AUTO is selected by pressing the 6.1/ES button on the

remote control, the Dolby Digital Matrix 6.1 or DTS ES decoder usually turns on and the corresponding DSP program is selected.

• 6.1/ES on the remote control can be used to play Dolby Digital or DTS 5.1 channel sources with rear center speaker. In this case the

program name changes to the corresponding name for 6.1 channel.

• When playing 6.1 channel source with 6.1/ES on the remote control off, the program name changes to the corresponding name for

5.1 channel.

Note

• The “

” indicator does not light up when selecting the program No. 11 except for the Enhanced mode.

No.