Configuration of adding a new device via snmpc – ZyXEL Communications 1 User Manual
Page 13
NetAtlas Support Notes
All contents copyright (c) 2006 ZyXEL Communications Corporation.
13
Configuration of adding a new device via SNMPc
In the following example, we will illustrate how to get started with SNMPc and Netatlas
with adding a new device. Follow the procedures from Step 1 to Step 11.
Step 1: In the edit button bar shown in the Figure 4 where you may select the icon to
insert a new element.
Figure 4 Adding a new Device
Step 2: In the map object properties, give the label name and enter the IP address of
the selected device. In this example, we configure 172.23.3.11 as its IP address of
ES-2108 as shown in Figure 5
Figure 5 Map Object Properties
Add a new device