Xerox VW37L User Manual

Page 32

VIZIO VW37L HDTV30A User Manual

Version 4/2/2008

www.VIZIO.com

2.11

Watching a TV Program

Before you start watching TV, please make sure that any cable, satellite or off-air antenna connections
are secure. Also, verify that the power cord is plugged into a correctly grounded electrical outlet or surge
protector.

Press the power button on the remote or on the side of the High Definition TV. The VIZIO
logo on the front will change from orange to white.

There are 3 options for selecting your programming:

a. If you are using an antenna or cable connected through the DTV/TV CABLE/ANTENNA

input, you can select TV directly by pressing the TV button on the remote, or by pressing
the INPUT button on the remote or on the side of the High Definition TV.

b. If you are watching broadcasts through a cable or satellite set-top box connected by an

HDMI cable, select HDMI directly by pressing the HDMI button on the remote, or by
pressing the INPUT button on the remote or on the side of the High Definition TV.

c. If you are watching broadcasts through a cable or satellite set-top box connected by a

Component (YPbPr) cable, select Component directly by pressing the Component button
on the remote, or by pressing the INPUT button on the remote or on the side of the High
Definition TV.

When using option 2a, press the Channel buttons on the remote or the CH+ / CH- buttons on
the side of the High Definition TV to change the channel.

Note: The Channel buttons, on the

side of the High Definition TV and on the remote, control will not work if you are watching a
program using HDMI, Component and AV inputs.

Note: You should be able to see a picture. If you do not,
make sure that all of the HDTV connections are secure and
you have selected the correct video input source.