Yamaha BLASTER YFS200N - Manual (Page 111)

8-11
EBU00458
Spark arrester cleaning
Be sure the exhaust pipe and muffler are cool
before cleaning the spark arrester.
1. Remove the screw.
2. Remove the tailpipe by pulling it out of the
muffler.
3. Tap the tailpipe lightly, then use a wire
brush to remove any carbon deposits from
the spark arrester portion of the tailpipe.
4. Make sure the gasket is properly posi-
tioned, then insert the tailpipe into the muf-
fler and align the screw holes.
5. Install the screw and tighten it.
1. Screw ( × 3)
q
1. Tailpipe
2. Spark arrester
3. Gasket
w
q
e