beautypg.com

Technical specifications, Installation, Positioning – Zanussi FREEZER ZV 47 User Manual

Page 13

background image

13

TECHNICAL SPECIFICATIONS

DIMENSIONS

Height

85

cm

Width

59.5

cm

Depth

60

cm

POWER SUPPLY VOLTAGE AND FREQUENCY

220-240 V / 50 Hz

TOTAL POWER ABSORBED

110 W

AVERAGE DAILY UNITS ELECTRICITY(*)

0.70 kWh

GROSS CAPACITY

110 l

NET CAPACITY

96 l

STAR RATING

(*)This figure is based on standard test results in accordance with European Standard EN153 (Actual
consumption will depend on how the appliance is used and where it is located).

INSTALLATION

D200

100 mm

10 mm

10 mm

A

B

NP006

Positioning

For this appliance to work efficiently, it should be
located away from heat sources, e.g. cookers,
radiators, boilers, direct sunlight etc. This also
includes locations or rooms where the ambient
temperature reaches above 32°C (90°F) or drops
below 10°C (50°F),e.g. conservatories.
You should also ensure that air can circulate freely
around the back and the top of the cabinet. There
must also be a minimum distance beween the top of
the cabinet and any overhanging kitchen furniture as
shown in the figure.
Do not obstruct the space underneath. The back of the
cabinet may be placed close to the wall but must not
touch it. DO NOT install in places with restricted
ventilation.

Adjust the level of the appliance by screwing out the
adjustable foot, or feet, at the bottom of the cabinet
using your fingers.