X-Micro Tech. F510 - Manual (Page 7)

6
Transfer data to and from X-VDO MP4 F510.
1. Make sure X-VDO MP4 F510 is turned off.
2. Remove the USB port cover of the player. Disconnect the
earphone.
3. Plug X-VDO MP4 F510 into the USB port of your
computer. The screen will show you that the player is in
USB mode by a picture(shown at the right). The player is
then automatically recognized (in 'My Computer') as
removable media devices.
4. Transfer files to or from the internal Flash RAM by
Windows explorer
• Right click on the start button
• Choose Explore to open Windows Explore on PC
•
Select the data file to save, drag and drop it into the player.
5. Unplug X-VDO MP4 F510 from your computer (Please do this referring to
“removing X-VDO MP4 F510 from your computer”), WMA/MP3 files
can now be listened to and all data stored can be transferred to another
computer.
Note:
9
Other types of data such as Word, Excel, PowerPoint, JPEG
…
etc. can be
stored and transferred by this player.
9
When transfer files to the player, please pay attention that two to three
Megabytes must be reserved for system files. Otherwise, the player may
not be properly turned on.
9
Do not disconnect the player when it is writing or reading.
Turning the player on / off
To turn on player, press the Play button.
To turn off player, press and hold the Stop button for about three seconds.
Listening to music files with X-VDO MP4 F510
Under the guide of “transfer of data to and from X-VDO MP4
F510” to copy WMA/MP3 music files to X-VDO MP4 F510.
1. Connect the supplied headphones to the earphone jack.
2. Press the Play button to turn on the player.
3. Press the Play button to play the music.