Yamaha VMX17Y(C) - Manual (Page 27)

INSTRUMENT AND CONTROL FUNCTIONS
4-11
2
3
4
5
6
7
8
9
TIP
To perform further multi-function dis-
play settings,
be sure the transmis-
sion is in neutral, then enter the
Select mode again by pushing and
holding “SELECT” and “RESET” for at
least three seconds.
Checking and resetting the system sta-
tus
The status/readings of the following
items are displayed, and the tripmeters
can be reset.
● tripmeters and odometer
● fuel consumption
● air intake temperature
● throttle opening position
TIP
● The “System status” menu cannot
be entered if the fuel level warning
light or coolant temperature warn-
ing light is on.
● If, when the engine is running
while the system status menu is
displayed, the fuel level warning
light or coolant temperature warn-
ing light comes on, the Normal
mode is automatically displayed.
1. Push “SELECT” to highlight “Sys-
tem status”, then push “RESET”.
2. Push “SELECT” to highlight “Yes”,
then push “RESET”. (Highlighting
“No” and pushing “RESET” returns
to the previous menu.)
The display changes to the status
screen.
Push “SELECT” and the various trip-
meters and the odometer are displayed
in the following order:
(TRIP-F)
→ TRIP-1 → TRIP-2 → ODO
→ (TRIP-F)
Push “RESET” to reset a tripmeter.
TIP
● Push “SELECT” for at least two
seconds to switch between miles
and kilometers.
● Pushing “RESET” displays the
Normal mode for five seconds.
Pushing “SELECT” and “RESET”
for at least three seconds, chang-
es the display to the Normal mode.
● To perform further multi-function
display settings, enter the Select
mode again by pushing and hold-
ing “SELECT” and “RESET” for at
least three seconds.
Resetting the maintenance counters
This function allows you to reset the
maintenance counters for the tires, the
engine oil, and an item of your choice.
1. Push “SELECT” to highlight “Main-
tenance”, then push “RESET”.