beautypg.com

Technical data installing the appliance – Zanussi ZERB 8643 User Manual

Page 15

background image

15

Ins

Ins

tr

tr

uctions f

uctions f

or the Ins

or the Ins

t

t

aller

aller

Technical data

Installing the appliance

Transportation, unpacking

It is recommended to deliver the appliance in
original packaging, in vertical position

considering the protective warning on packaging.

After each transportation the appliance must not be
switched on for approx. 2 hours.

Unpack the appliance and check if there are damages
on it. Report possible damages immediately to the
place you bought it. In that case retain packaging.

Cleaning

Remove every adhesive tape and everything else,
which ensure the accessories not to move in the
appliance.

Wash the inside of the appliance using lukewarm
water and mild detergent. Use soft cloth.

After cleaning wipe out the inside of the appliance.

Placement

The ambient temperature has an effect on the energy
consumption and proper operation of the appliance.
When placing, take into consideration that it is
practical to operate the appliance between ambient
temperature limits according to the climate class that
is given in the chart below and can be found in the
data label.

Model

Gross capacity (l)

Net capacity (l)

Width (mm)

Height (mm)

Depth (mm)

Energy consumption (kWh/24h)

(kWh/year)

Energy class, according to EU standards

Freezing capacity (kg/24h)

Rising time (h)

Rated current (A)

Weight (kg)

Number of compressors

ZERB 8643

Freezer: 249

Refrigerator: 109

Freezer: 245

Refrigerator: 92

595

1890

632

0,96

350

A

4

20

0,9

73

1

Mount the spacers supplied in the plastic bag
of the accessories. Hold the spacer as shown
on the Fig., knock it home, then turn it by 90°.
(Into the oval holes of back side of the
appliance.)

If the ambient temperature goes below the lower
data the temperature of the cooling compartment
can go beyond the prescribed temperature.

If the ambient temperature goes beyond the upper
data this means longer operating time of the
compressor, breakdown in the automatic
defrosting increasing temperature in the cooling
compartment or increasing energy consumption.

Class of climate

Ambient temperature

SN

+10 ... +32 °C

N

+16 ... +32 °C

ST

+18 ... +38 °C