Zenith MBR3430 - Manual (Page 4)

REMOTE CONTROL MODEL MBR3430
CABLE-TV OPERATIONS
The following functions and operations apply to a Zenith
cable-TV decoder. The remote control must be in the CABLE
mode to operate your cable-TV decoder. The remote control supplied with your cable-TV decoder may
have keys not duplicated on the new remote. If these functions
are desired, the original remote control will have to be used.
MODE
Used to select the Cable mode of
operation.
CABLE
Lights when CABLE mode of
operation is selected.
MENU, SELECT, ADJUST
and QUIT
Functions depend on Cable-TV
system. See Cable-TV decoder
operating guide for details.
Numbered Buttons
Used to select channels through
Cable-TV decoder.
ENTER
Used with the numbered buttons to
select a TV channel through the
Cable-TV decoder.
Point toward decoder.
MENU
SOURCE
FLASHBK
CHANNEL
LEARN PIP FREEZE
SWAP TIMER SEQ
RECORD STOP PAUSE SEARCH
REW PLAY F FWD
OFF/ON
Used to turn VCR ON or OFF.
S O U R C E
Selects “A” or “B” cable channels.
CHANNEL Up/Down
Used to sequence through channels
on the Cable-TV decoder.
2736-O 4 - 4