beautypg.com

Replacing a front turn signal light, Bulb -34, Replacing a rear turn signal light – Yamaha XVS13AW(C) User Manual

Page 73: Periodic maintenance and minor repair

background image

PERIODIC MAINTENANCE AND MINOR REPAIR

6-34

6

EAU42460

Replacing a front turn signal
light bulb

1. Remove the front turn signal light

outer lens by removing the screws.

2. Remove the inner lens by pulling it

out.

3. Remove the defective bulb by

pushing it in and turning it counter-
clockwise.

4. Insert a new bulb into the socket,

push it in, and then turn it clock-
wise until it stops.

5. Place the inner lens in the original

position, and then install the outer
lens by installing the screws.

CAUTION:

ECA10680

Do not overtighten the screws, oth-
erwise the lens may break.

EAU42450

Replacing a rear turn signal
light bulb

1. Remove the turn signal lens by re-

moving the screws.

2. Remove the defective bulb by

pushing it in and turning it counter-
clockwise.

3. Insert a new bulb into the socket,

push it in, and then turn it clock-
wise until it stops.

4. Install the lens by installing the

screws.

CAUTION:

ECA10680

Do not overtighten the screws, oth-
erwise the lens may break.

1. Screw

1. Inner lens

1. Screw

U3D810E0.book Page 34 Wednesday, July 19, 2006 11:14 AM