Zanussi ZUD 9100 F - Manual (Page 18)

18
3
10
11
9
12
13
Attention
After completion of the door reversing opera-
tion, check that the door gasket adheres to the
cabinet. If the ambient temperature is cold (i.e.
in Winter), the gasket may not fit perfectly to
the cabinet. In that case, wait for the natural fit-
ting of the gasket or accelerate this process by
heating up the part involved with a normal
hairdryer on a low setting.
DO013
600
550
min.
600
Building in the appliance under a worktop
1
1xA
12
1xB 2xC
2
2
1
1
2
1. The dimensions of the recessed installation area
must correspond with those indicated in the figure.
2. Installation kit