Yamaha RX-V690 - Manual (Page 17)

17
1
Select the source to be recorded.
2
Play the source and then turn the VOLUME control
up to confirm the input source. (For detailed information
on the tuning operations, refer to page 19.)
3
Set the tape deck or VCR to the recording mode.
4
If the tape deck is used for recording, you can monitor
the sounds being recorded by pressing TAPE
MONITOR.
Note
DSP, VOLUME, BASS, TREBLE and BALANCE control
settings have no effect on the material being recorded.
TO RECORD A SOURCE TO TAPE
(OR DUB FROM TAPE TO TAPE)
VIDEO AUX VCR 2 VCR 1 LD/TV
TUNER CD PHONO
TAPE
MONITOR
VIDEO AUX VCR 2 VCR 1 LD/TV
TUNER CD PHONO
TAPE
MONITOR
1, 4 2