Yamaha AX-892 - Manual (Page 14)

14
The remote control provided with this unit is designed to control all the most commonly used functions of the unit. If the CD player,
tuner, turntable and tape deck connected to this unit are YAMAHA components designed for remote control compatibility, then this
remote control will also control the various functions of those components.
KEY FUNCTIONS
YAMAHA HiFi SYSTEM
REMOTE CONTROL TRANSMITTER
AUX
TAPE 2
TAPE 1 A/B
PLAY REC/PAUSE DIR A DIR B
CD
PHONO
PLAY
/CUT
PLAY DISC
TUNER A/B/C/D/E PRESET
POWER VOLUME
To control this unit
1
Input selector keys
Select an input source.
2
VOLUME +/– keys
Adjust the volume level.
3
POWER key
Turns the power on and off.
While the power is on, pressing the POWER key on the
remote control switches the unit from the power-on mode
to the standby mode and vice versa. (In this mode, the
power indicator on the unit is half-illuminated.)
To control other components
Identify the remote control keys with your component’s keys. If
the keys are identical, the functions will be the same. If the keys
are different, refer to the component’s manual for their functions.
1
Tape deck keys
Control the tape deck.
● DIR A, DIR B, and A/B are applicable only for a dual
tape deck.
● For a single tape deck with an automatic reverse
function, pressing DIR A will reverse the direction of the
tape.
2
Tuner keys
Control the tuner.
+: Selects a higher preset station number.
–: Selects a lower preset station number.
A/B/C/D/E: Selects a group (A-E) of preset stations.
3
CD player keys
Control the compact disc player.
● DISC is applicable only for a compact disc changer.
4
PLAY/CUT key
Press PLAY/CUT to lower the pick-up arm and press it
again to raise the arm.
1
4
2
3
1
2
3
* The AX-492’s remote control does not have a PLAY/CUT
key.
AX-592 and AX-892 only
REMOTE CONTROL