Servicing, The dryer does not start up, The dryer does not dry properly – Zanussi TDS 372T User Manual

Page 14

Text mode
Original mode

SERVICING

Before contacting your local Zanussi
Service Centre, please make the following
checks:

The dryer does not start up

■

The door is open.

■

The plug is not fitted into the wall socket.

■

There is no electricity supply from the wall
socket.

■

The time selector dial is not set correctly.

The dryer does not dry properly

■

The filter is clogged.

■

Insufficient drying time.

■

The selected cycle is not suitable for the
laundry.

■

Excessive laundry load.

■

The dryer is not correctly installed.

If, after the above checks, there is still a fault, call
your local Zanussi Service Centre.
Please make sure you give the model and serial
number of the appliance.
This information can be found on the rating plate
(see picture) or on the guarantee card.

P0307

Mod. ...
Prod. No. ........

Ser. No. ............