Zenoah YM 415 DW - Manual (Page 7)

Model name YM415DW
Engine model G45L
Displacement 41.5cm 3
Carburetor Diaphragm
Ignition system IC controlled flywheel magneto
Spark plug NGK BPMR-7A
Fuel Mixture (Gasoline 25 : 2-Cycle Oil 1)
Fuel tank capacity 0.94 litres
Starter Recoil starter
Clutch Cetrifugal type
Reduction ratio 1.235
Cutter rotation Counter-clockwise as viewed from operator
Overall dimension L 1830mm
W 630mm
H 480mm
Dry weight 7.1kg
• Specifications are subject to change without notice
Specifications
Should any failure occur on the product
under normal operating conditions within
the applicable warranty period, the failed
part will be replaced or repaired at free of
charge by YANMAR S.P. authorized
dealer.
WARRANTY PERIOD: 6 months from the
date of initial purchase.
IMPORTANT: The following cases are not
covered by this warranty:
(a) Any failure resulted from neglect of
instructions for proper operation and
maintenance of the product described
in the operator's manual.
(b) Any damage due to accidents, abuse,
negligence, alteration, or use of any
parts or accessories other than those
specified by YANMAR S.P.
(c) Any failure due to use of improper fuel.
(d) Replacement of normally consumed
parts: cutter blades, spark plugs,
starter ropes, etc.
(e) Regular maintenance and adjustments
explained in the operator's manual.
(f) Incidental or consequential damages.
(g) Transportation charge for
failed/repaired unit.
Nothing contained in this warranty affects
the consumer's statutory rights.
Limited warranty
7