Set >cancel, Check:testtone check ok? ..yes – Yamaha RX-V363 User Manual
Page 27
23
En
Basic setup
PREP
ARA
TION
English
7
Press 7n to select “SET” and then 7l / h
to select the desired setting.
SET >CANCEL
Choices: SET, CANCEL
• Select “SET” to apply the settings you made.
• Select “CANCEL” to cancel the setup procedure
without making any changes.
y
You can also press HMENU to cancel the setup procedure.
8
Press 7
ENTER to confirm your selection.
If you selected “SET” in step 7, each speaker outputs
a test tone twice in turn. “CHECK:TestTone” appears
in the front panel display for a few seconds and then
“CHECK OK?” appears in the front panel display.
y
• Check the speaker connections (see page 5) and adjust the
“SPEAKERS” settings back in step 6, if necessary.
• The indicator of the speaker currently outputting the test
tone flashes in the front panel display.
9
Press 7l / h to select the desired setting.
Choices: YES, NO
• Select “YES” to complete the setup procedure if
the test tone levels from each speaker were
satisfactory.
• Select “NO” to proceed to the speaker level
adjustment menu to balance the output level of
each speaker.
10
Press 7
ENTER to confirm your selection.
• If you selected “YES” in step 9, the setup
procedure is completed and the display returns to
the top set menu display. Press HMENU to exit
from “BASIC SETUP”.
• If you selected “NO” in step 9, the front speaker
level adjustment display appears in the front panel
display.
11
Press 7k / n to select a speaker and then
7l / h to adjust the balance.
The selected speaker and the front left speaker (or the
surround left speaker) output a test tone in turn.
• Press 7h to increase the value.
• Press 7l to decrease the value.
FR ----||----
• Select “FR” to adjust the balance between the front
left and right speakers.
• Select “C” to adjust the balance between the front
left and center speakers.
• Select “SL” to adjust the balance between the front
left and surround left speakers.
• Select “SR” to adjust the balance between the
surround left and surround right speakers.
• Select “SWFR” to adjust the balance between the
front left speaker and the subwoofer.
The available speaker channels differ depending on the
setting of the speakers.
12
Press H
MENU to exit from “BASIC SETUP”.
CHECK:TestTone
CHECK OK?
..YES
Note
01EN_RX-V363_U.book Page 23 Friday, December 7, 2007 5:44 PM
Black process 45.0° 240.0 LPI