Zenoah G2500 OPS - Manual (Page 3)

G2500 / G2500 OPS
GB-3
G
B
Contents
1. For Safe Operation ................................................................... 4
2. Explanation of Symbols on the Machine .................................. 8
3. Installing Guide Bar and Saw Chain ......................................... 9
4. Fuel and Chain Oil .................................................................. 10
5. Operating the Engine ............................................................. 11
6. Sawing .................................................................................... 13
7. Maintenance ........................................................................... 15
8. Maintenance of Saw Chain and Guide Bar ............................ 16
9. Troubleshooting Guide ........................................................... 17
10. Disposal .............................................................................................. 17
11. Specifications ......................................................................... 18
12. Limited Warranty ..................................................................... 19
Masahiko GOUDA
General Manager, Quality Assurance Department
Signed in Saitama, Japan
DECLARATION OF CONFORMITY TO MACHINES DIRECTIVE
(Directive 98/37/EC, 89/336/EEC)
and to the regulations governing transposition
Internal control production
MANUFACTURER : ZENOAH CO.,LTD
No. 9, 1-Chome
MINAMIDAI, KAWAGOE City
SAITAMA, JAPAN
DECLARES THAT THE DESIGN OF THE MACHINE DESCRIBED BELOW :
Model : G2500 OPS
Serial no. : 510001 and up
Make : ZENOAH
1st April 2007
Masahiko GOUDA
General Manager, Quality Assurance Department
Signed in Saitama, Japan
DECLARATION OF CONFORMITY TO MACHINES DIRECTIVE
(Directive 98/37/EC, 89/336/EEC)
and to the regulations governing transposition
Internal control production
MANUFACTURER : ZENOAH CO.,LTD
No. 9, 1-Chome
MINAMIDAI, KAWAGOE City
SAITAMA, JAPAN
DECLARES THAT THE DESIGN OF THE MACHINE DESCRIBED BELOW :
Model : G2500
Serial no. : 110001 and up
Make : ZENOAH
CONFORMS TO THE REQUIRMENTS OF THE MODIFIED MACHINES
DIRECTIVE (Directive 98/37/EC) AND TO THE NATIONAL REGULATIONS
GOVERNING ITS TRANSPOSITION ABROAD : AND
THAT IT HAS BEEN ISSUED WITH A “CE” CERTIFICATE,
NO. M. 0303. 02. 2737
BY THE ISTITUTO CERTIFICAZIONE EUROPEA PALAZZO DEL VESCOVO - V.
GARIBALDI, 20 40011 ANZOLA DELL’ EMILIA - ITALY
1st April 2007
CONFORMS TO THE REQUIRMENTS OF THE MODIFIED MACHINES
DIRECTIVE (Directive 98/37/EC) AND TO THE NATIONAL REGULATIONS
GOVERNING ITS TRANSPOSITION ABROAD : AND
THAT IT HAS BEEN ISSUED WITH A “CE” CERTIFICATE, NO. U3 2592658 01
BY TÜV Rheinland Group - TÜV Rheinland InterCert kft. Product Certification -
H-1061 Budapest Paulay Ede u. 52 - HUNGARY