Zonet Technology ZEW1642 - Manual (Page 19)

802.11n Wireless PCI Adapter
16
4.7 WPS Configuration
WPS page supports the configuration setup using PIN configuration method or PBC
configuration method. WPS(Wi-Fi Protected Setup) is to simplify the security setup and
management of Wi-Fi networks.
1.
WPS AP List: Display the information of surrounding APs with WPS IE from last
scan result, including SSID, BSSID, Channel, ID (Device Password ID),
Security-Enabled.
2. Rescan: Update information on surrounding wireless network.
3.
Information: Display the information about WPS IE on the selected network, list
including Authentication Type, Encryption Type, Config Methods, Device Password
ID, Selected Registrar, State, Version, AP Setup Locked, UUID-E and RF Bands
4. PIN Code: 8-digit numbers.
5. Config Mode: Enrollee or external Registrar
6. Detail: Information about Security and Key in the credential.
7. Connect: Connect to the selected network inside credentials.
8. Rotate: Connect to the next network inside credentials.
9. Disconnect: Stop WPS action and disconnect this active link.