Connecting video components, Types of video jacks, Connecting a video monitor – Yamaha RX-V440RDS EN User Manual
Page 12: Connecting a dvd player, Connecting a digital tv/cable tv, Connecting a recording component
10
Connecting video components
Refer to the connection examples on the next page.
■ Types of video jacks
1 VIDEO jack
Conventional composite video signal.
2 COMPONENT VIDEO jacks
Transmit color difference (P
B
, P
R
) and luminance
separately and provide the best quality picture.
Use the commercially available cable type specified for
connecting each jack.
y
• You can designate the input for the COMPONENT VIDEO A
and B jacks to suit your components by using “INPUT 1 I/O
ASSIGNMENT” on the set menu.
■ Connecting a video monitor
Connect the video input jack on your video monitor to the
MONITOR OUT VIDEO jack.
Note
• If you connect this unit with a source component using
Component video jacks, you also need to connect your video
monitor using Component video jacks.
■ Connecting a DVD player
Connect the optical digital audio signal output jack on
your component to the DIGITAL INPUT jack and
connect the video signal output jack on the component to
the VIDEO jack on this unit.
y
• Use the AUDIO jacks on this unit for a video component
which does not have optical digital output jack. However,
multi-channel reproduction cannot be obtained with audio
signals input from the AUDIO jacks.
■ Connecting a digital TV/cable TV
Connect the video signal output jack on your component
to the VIDEO jack on this unit.
Connect the audio signal output jacks on the component
to the AUDIO jacks on this unit.
■ Connecting a recording component
Connect the audio signal input jacks on your video
component to the AUDIO OUT jacks on this unit. Then
connect the video signal input jack on the video
component to the VIDEO OUT jack on this unit for
picture recording.
Connect the audio signal output jacks on your component
to the AUDIO IN jacks on this unit. Then connect the
video signal output jack on the component to the VIDEO
IN jack on this unit to play a source from your recording
component.
Note
• Once you have connected a recording component to this unit,
keep its power turned on while using this unit. If the power is
off, this unit may distort the sound from other components.
CONNECTIONS
COMPONENT VIDEO
P
R
P
B
Y
VIDEO
1
2
0103RX-V440_09-18_EN_GB.p65
03.1.17, 3:36 PM
10