Zanussi ZWF 14280 W - Manual (Page 16)

16
To enable or disable this option press
simultaneously for about 6 seconds "Extra
Rinse" and "Options" buttons until the icon
appears or disappears on the display.
8. Select the Start/Pause
To start the selected programme, press the
Start/Pause button; the corresponding green
pilot light stops flashing.
The «Wash» and
«Door» lights are lit to
indicate that the
appliance starts
operating and the door
is locked.
To interrupt a programme which is running,
depress the Start/Pause button: the
corresponding green pilot light starts to flash.
To restart the programme from the point at
which it was interrupted, press the Start/Pause
button again.
If you have chosen a delayed start, the
machine will begin the countdown.
IMPORTANT!
If an incorrect option is selected, the red pilot
light of the Start/ Pause button flashes 3 times
and the message Err is displayed for about 2
seconds.
9. Select the Delay Start
Before you start the
programme, if you wish
to delay the start, press
the Delay Start button
repeatedly, to select the
desired delay.
90’
Delay Start
Start/Pause
Wash
Door
End
The selected delay time value (up to 20 hours)
will appear on the display for about 3 seconds,
then the duration of the programme will appear
again.
You must select this option after you have set
the programme and before you press the
Start/Pause button.
Selecting the delayed start:
●
Select the programme and the required
options.
●
Select the delay start.
●
Depress “Start/Pause” button: the machine
starts its hourly countdown.
The programme will start after the selected
delay has expired.
Cancelling the delayed start:
You can cancel the delay time at any moment,
before you press the Start/Pause button.
If you have already pressed the Start/Pause
button, and you wish to cancel the delay time,
proceed as follows:
• set the washing machine to PAUSE by
pressing the Start/Pause button;
• press the Delay Start button more times until
the symbol 0’ is displayed.
• press the Start/Pause button again to start
the programme.
IMPORTANT!
• The selected delay can be changed only after
selecting the washing programme again.
• The door will be locked throughout the delay
time. If you need to open the door, you must
first set the washing machine to PAUSE by
pressing the Start/Pause button and then wait
about 2 minutes untill the «Door» light has
gone off. After you have closed the door,
press the Start/Pause button again.
Operating sequence
Smart 132973840.qxd 11/09/2007 10.43 Pagina 16