Zenith PRO895X - Manual (Page 20)

206-3634
EXAMPLES OF DISPLAY SETUP DISTANCES
AND CENTER POINTS
“A”* “B”
Screen Projection Display “Peerless”
Width Distance Center Mount Center
48” 58 5/8” 26 3/8” 11”
60” 72 7/8” 30 3/4” 11”
80” 96 3/8” 38” 11”
96” 115 1/4” 43 5/8” 11”
120” 143 1/2” 52 3/8” 11”
144” 171 7/8” 61” 11”
160” 190 5/8” 66 3/4” 11”
200” 237 7/8” 81 1/8” 11”
PHYSICAL SETUP TO THE SCREEN (for all aspect ratios)
1. Set distance “A” according to the selected display width
(* or calculate the distance in inches “A” = 1.179 x
width) +2.063
Note: Distance “A” is measured from the cabinet panel
front directly below the green CRT lens.
2. Calculate the Display Center “B” from a reference line
projected from the bottom of the cabinet. Display
Center “B” = A x 0.3057) + 8.44.
3. Set the projector’s height using measurement “B”. This
references the bottom of the cabinet to the display
center. When doing a ceiling mount, be sure to allow for
the dimensions of the mounting bracket hardware.
4. Ensure that the projector is mounted horizontally
centered and perpendicular to the screen.
5. The Peerless ceiling-mount center is 11” from the “A”
distance reference point on the PRO895X front.
PHYSICAL SETUP
P A G E 2 0
CRT Front View