Yamaha NS-IW360C - Manual (Page 2)

2
CONSUMER PRECAUTIONS
Read these precautions carefully before installing your NS-IW360C speakers.
z Before you begin installation, read this owner’s manual completely and consult your local building codes. If you
have any doubt, contact your dealer or a qualified audio/video installer.
z YAMAHA recommends installing the speaker only in two-by-four wood frame or similar construction. The
instructions provided in this owner’s manual are intended specifically for this type of wall construction.
z When installing your NS-IW360C in-ceiling speakers, be aware of the product weight (See specification page)
and the sturdiness of the material into which you are installing the speaker.
z Be aware of any concealed studs, electrical wiring or plumbing in the wall or ceiling into which you are
installing the speakers. If you are not sure of a safe way to install these speakers, consult a professional
installer or a building contractor.
z Never touch the woofer or tweeter units with your hands or expose them to excessive physical shock. If they
are dented or bent, the sound will be distorted.
z Lower the power amplifier/receiver volume control before changing input sources. Never change input sources
(for example, FM to CD) at high listening levels. Always turn the receiver/amplifier unit off when installing or
removing any cables.
z Anytime you note distortion, reduce the volume control on your power amplifier/receiver to a lower setting.
Never allow your power amplifier to be driven into “clipping”.
z Secure placement or installation is the owner’s responsibility. YAMAHA shall not be liable for any accident
caused by improper placement or installation of speakers.
WARNING:
Installation shall be in accordance with the applicable section of the National Electrical Code, ANSI/NFPA 70,
and/or the National Fire Alarm Code, ANSI/NFPA 72, as applicable. The wiring method and compartment shall
be such as not to interfere with the operation of the speaker.