Yamaha YHT-470 - Manual (Page 15)

15
Automatic searching of the peak level on a disc
This convenient feature automatically searches the part on a disc where the source level peaks, and next plays the part repeatedly.
For recording to tape, this feature is very helpful to adjust the recording level on the tape deck.
1
Stop the unit.
2
Searches the peak level through the disc.
Repeatedly plays the part where the source level peaks.
To cancel the peak level searching function
Press the STOP button. (However, some other buttons can
also be used to cancel this function.)
Notes
• Even if the peak level searching is performed twice or more
on the same disc, the same part will not be always selected,
because this unit will search the peak level among parts on
the disc that are randomly selected by the internal
microcomputer.
• This feature will also function in the program play mode. If
program play is being performed, first press the STOP
button, and then press the PEAK button. If program play is
not being performed, only press the PEAK button.
LOGODISK
1 2
STOP
PEAK
10 11 12
10 11 12