Step 1: connecting this unit, Step 1: connecting this unit 1 2 3 – Yamaha PJP-50R User Manual
Page 10
Preparation Procedure
5
English
INST
ALL
A
T
ION
Follow the procedure below to connect this unit to the network, and then connect the AC adapter.
1
Connect the required communication cable.
• Connect the LAN cable between the LAN port of
the system and the network.
• Connect the modular cable between the LINE port
of the system and the telephone circuit.
2
Connect the AC adapter to the DC IN 12V
terminal.
3
Connect the power cable to the AC adapter.
4
Connect the power cable to the AC outlet.
This unit is turned on and the microphone indicators
light up in sequence.
Step 1: Connecting this unit
1
2
3
To an AC wall outlet