Yamaha F225D - Manual (Page 52)

Maintenance
46
EMU30560
Maintenance chart
NOTE:
● Refer to the sections in this chapter for explanations of each owner-specific action.
● The maintenance cycle on these charts assume usage of 200 hours per year. Maintenance
frequency should be adjusted according to usage conditions.
● Disassembly or repairs may be necessary depending on the outcome of maintenance
checks.
● Expendable or consumable parts and lubricants will lose their effectiveness over time and
through normal usage regardless of the warranty period.
The “ ” symbol indicates the check-ups which you may carry out yourself.
The “ ” symbol indicates work to be carried out by your Yamaha dealer.
Item Actions
Initial Every
10 hours
(1 month)
50 hours
(3 months)
100 hours
(6 months)
200 hours
(1 year)
Anode(s) (external)
Inspection /
replacement
Anode(s) (internal)
Inspection /
replacement
Battery Inspection / charging
Cooling water
passages
Cleaning
Cowling clamp Inspection
Fuel filter (can be
disassembled) Inspection /
replacement
Fuel system Inspection
Fuel tank (Yamaha
portable tank)
Inspection / cleaning
Gear oil Change
Greasing points Greasing
Idling speed (EFI
models)
Inspection / adjustment
PCV (Pressure Control
Valve)
Inspection
Power trim and tilt unit Inspection
Propeller and cotter pin
Inspection /
replacement
Shift link / shift cable Inspection / adjustment
Thermostat Inspection
Throttle link / throttle
cable / throttle pick-up
timing
Inspection / adjustment
U69J14E0.book Page 46 Friday, March 12, 2004 10:20 AM