Zanussi ZI 9121 FA - Manual (Page 16)

16
Dimensions of the recess
Height of housing (1) mm 880
Depth of housing (2) mm 550
Width of housing (3) mm 560
It is necessary that the cabinet has a ventilation
recess with the following dimensions:
Depth
50 mm
Width 540 mm
Building in
PR0
540
50
3
2
1
For appropriate venting, follow indications in the
figure.
50 mm
min.
200 cm 2
200 cm
2
min.
D526
2. Press in the joint covers between the appliance
and the kitchen furniture.
D132
3. Open the door and push the appliance against the
side of kitchen furniture opposite to that of the
appliance hinges. Fasten the appliance with 4
screws (I) provided in the kit included with the
appliance.
I
D022
1
2
1. Fit the appliance in the niche by making sure that
it stands against the interior surface of the unit on
the side where the door hinges of the appliances
are fitted. Insert the appliance until the upper strip
butts up against the unit (1) and make sure that
the lower hinge is in line with the surface of the
unit (2).