Zanussi ZNB 404 S - Manual (Page 14)

14
Defrosting
Defrosting is automatic in this model.
)
To Change the Light Bulb
Should the light fail to work you can change it as
below:
Break the circuit of the appliance.
Press the rear hook (1) of the lampcover by a
screwdriver and at the same time pull and rotate the
cover in the direction indicated by the arrow (2). So
the bulb can be replaced. (Bulb type: T25 Daylight
230-240 V, 25 W, E 14 thread)
After changing the bulb replace the cover, snap it in
place and apply voltage to the appliance.