Yamaha CRW2216E-NB - Manual (Page 16)

Chapter 2 - Installing the Yamaha CRW2216E Drive
10
AUDIO cable
8. Connect the power supply cable.
Connect the +12V and +5V 4-pin power cable to the power supply
interface located on the rear panel of the CRW2216E drive.
The shape of the connector makes it impossible to reverse the connec-
tions.
If you have difficulty when inserting the connector, try wiggling the
connector left and right while inserting it.
To the CRW2216E
4-pin connector (large)
To the Sound Card (Sound Blaster compatible)
4-pin connector (small)
IDE
INTERF ACE
CONNECT
OR
DC INPUT
1
5V +
12V +
G
R G
L
AUDIO OUT
CSEL
SLAV E
MASTER