Zanussi ZCF 146 C - Manual (Page 14)

14
Positioning
Place the freezer horizontally on a firm surface,
resting on all four wheels. Use a wooden block or
similar object to compensate for any bumps/holes
in the floor's surface.
The room should be dry and adequately ventilated.
If the room temperature exceeds 32°C, or falls
below freezing point, the freezer will not function as
it should.
Do not place the freezer close to sources of heat,
radiators, chimneys, etc. and do not place the
freezer in direct sunlight.
If the freezer has been handled standing on end, it
should be allowed to stand in the normal position
for about 12 hours before switching it on.
Ensure that the appliance is installed where it is
easily accessible for the engineer in the event of a
breakdown.
Technical Specifications
Installation
Model
Volume (gross) litres
Volume (net) litres
Height with rollers cm
Width cm
Depth cm
Weight kg
Energy consumpt./24h kWh
Freezing capacity kg/24h
Hold-over time hours
Rated power W
ZCF 77A
220
215
87,6/88,3
79,5
66,5
39
0,94
14
26
80
ZCF 94A
271
265
87,6/88,3
93,5
66,5
44
1,05
15,5
27
80
ZCF 115A
313
306
87,6/88,3
105
66,5
49
1,15
17
28
85
ZCF 127A
364
356
87,6/88,3
119
66,5
53
1,26
18
30
90
ZCF 146A
414
404
87,6/88,3
132,5
66,5
56
1,37
19
32
105
S
1 2 3 4 5 6 7
this appliance complies with the following EC Directives:
- 73/23/EEC of 19. 02. 1973 - Low-Voltage Directive
- 89/336/EEC of 03. 05. 1989 (including Amendment Directive 92/31/EEC - EMC Directive.
Some of the models are not available in all countries.
Testing has been carried out in accordance with ISO 5155 regarding the determination of freezer capacity, energy consumption and hold-overtime.
Information for test institute: A plan of the positioning of test packages may be obtained directly from the manufacturer.