Xantrex Technology TC10 User Manual
Page 14
14
CAUTION! To reduce risk of fire, do not cover or obstruct the
ventilation openings. Do not install the Truecharge 10 in a zero-
clearance compartment. Overheating may result.
WARNING: This equipment contains components that may produce
arcs or sparks. To prevent fire or explosion, do not install in
compartments containing batteries or flammable materials or in
locations that require ignition-protected equipment.
Temporary Mounting
The Truecharge 10 may be temporarily mounted during charging, using
the keyholes and holes provided. Mounting hardware should be
corrosion resistant #8 (4mm) screws.
The Truecharge 10 may be mounted on a flat, horizontal or vertical
surface. If mounting on a vertical surface such as a wall, the orientation
should be horizontal, with the keyholes at the top.