Zenoah CHTZ6000 - Manual (Page 4)

GB-4
HTZ7500 / CHTZ6000 / CHTZ7500
Model HTZ7500 CHTZ6000 CHTZ7500
Type Reciprocating Reciprocating Reciprocating
single-sided dual blades double-sided dual blades double-sided dual blades
Dry weight 5.96 (kg) 5.83 (kg) 6,10 (kg)
Blade size 750 (mm) 600 (mm) 750 (mm)
Blade pitch 35 (mm)
Transmission Centrifugal clutch, Cam-crank
Reduction ratio 5.11
Engine Type Air -cooled 2-stroke gasoline
Model Zenoah GZ23N
Displacement 23.6 (cm 3 )
Max. output 1.09Hp (0.8kW) at 8000 / min -1 (rpm)
Idle speed 3000±200 / min -1 (rpm)
Fuel mixture (Gasoline 50 : Oil 1) (when using ZENOAH genuine oil)
Carburetor Walbro Diaphragm type
Spark plug CHAMPION RZ7C or NGK CMR7H
Fuel tank capacity 0.47 (litter)
Specifications are subject to change without notice.
2. Specification
3. Warning labels on
the machine 4. Symbols on the
machine
If warning label peels off or becomes soiled and
impossible to read, you should contact the
dealer from which you purchased the product
to order new labels and affix them in the required
location(s).
Never modify your machine.
We won’t warrant the machine, if you use the
remodeled hedge trimmer or if you don’t ob-
serve the proper usage written in the manual.
For safe operation and maintenance, symbols are carved
in relief on the machine. According to these indications,
please be careful not to make a mistake.
The port to refuel the “MIX GASOLINE”
Position: FUEL TANK CAP
The direction to close the choke
Position: AIR CLEANER COVER
The direction to open the choke
Position: AIR CLEANER COVER
(1)Read owner's manual before operat-
ing this machine.
(2)Wear head, eye and ear protection.
(3)Handling this machine improperly
could result in accidents causing se-
rious injur y or death. Read this
manual carefully and practice using
the hedge-trimmer until you are fully
acquainted with all operations and
have learned to use it correctly.
(4)This is extremely sharp and can eas-
ily cause cuts.