Operating dehumidifier, Safety information, Fan speed – Whirlpool AD40LJ0 User Manual
Page 5: Empty/adjust bucket light, Dryness control
Safety information
5
Operating dehumidifier
FAN SPEED:
Some models: this controls fan
operation. Use desired setting.
HIGH - for faster moisture removal.
LOW - for slower moisture removal.
EMPTY/ADJUST BUCKET light:
If this light is on, the dehumidifier is
not running. This light indicates that
you need to check:
• If the bucket is full, empty bucket
and replace.
• If the bucket is not in position,
remove bucket and replace. Make
sure the bucket fits all the way into
the dehumidifier and the light is off,
or dehumidifier will not run.
DRYNESS CONTROL:
This controls the amount of moisture in
the room. Turn the control knob
clockwise for more drying. Turn the
control knob counterclockwise for less
drying. Turn control knob to “NORMAL”
to maintain average humidity
conditions.
NOTE: For the first few days of use, turn
the Dryness Control clockwise to
“DRYEST” to remove extra moisture
from the furnishings as well as the
room air.
FAN SPEED
HIGH
LOW
DRYNESS CONTROL
EMPTY/ADJUST
BUCKET
NORMAL
D
R
Y
E
S
T
OFF
CONTINUOUS
5