Whistler 1675 - Manual (Page 24)

RESET FEATURES
22
Reset Features
All user features can be reset to factory settings.
• Unplug Power Cord from unit.
• Press and hold (Power) and (Quiet).
• Plug Power Cord into unit.
• Wait for 2 beeps.
• Release and . Unit is now reset.
1. Audio to level (4).
2. Display reads Highway.
3. Dim/Dark Mode to full illumination of display.
4. Auto Quiet Mode OFF.
5. VG-2 Detection Mode OFF.
6. Combo ON.
7. Safety ON.
8. Vehicle Battery Saver ON.
9. Full Power Up sequence.
10. Default TONE 3.
11. Unit ON or OFF.
NOTE: Must calibrate compass after resetting features.