Waves EQ Sampling System Q-Clone - Manual (Page 28)

In this dialog box check the “Always” option and click OK.
6. Open your DP session and open a new Audio file (which will be
dedicated to the Q-Capture).
7. On this dedicated track, assign the input of the channel to the audio
card input that is connected to the hardware output cable ( input Y ).
8. Also on this dedicated track, assign the output of the channel to the
output of your audio card which receives the hardware input cable
(
output X ).
9. Arm the “Rec” button on this channel.
Waves Q-Clone Manual 28