Williams Sound SoundPlus Infrared System WIR SYS 90 PRO User Manual

Soundplus, Infrared system, Model wir sys 90 adv

m
•

SoundPlus

Infrared System •

Model WIR SYS 90 ADV

Description:

The TX90 two channel IR transmitter combines modulator and emitter technology into a single operating unit, which
reduces operating cost and eliminates precious rack space. The TX90 transmitter advduces a wide-angle infrared sig-
nal that concentrates the IR energy efficiently in the listening area. Operating on the 2.3-3.8 MHz bandwidth, the
TX90 is less susceptible to radio and lighting interference. Each TX90 transmitter can cover up to 28,000 sq ft (2,600
sq m) in single-channel operation. The coverage area can be easily increased by connecting additional TX9 emitters.
A wall/ceiling omnidirectional mount is included, and stand kits are available for portable operation. Each WIR SYS 90
ADV includes (1) TX90, (5) RX18 receivers, (1) CHG 518 five bay charger.

Dimensions, Weight:

11.25" W x 6.25" H x 2.125" D (28.6 cm x 15.9 cm x 5.4 cm), 1.8 lbs (0.8 kg)

Color:

Black with white legends, black acrylic lens

Power Supply:

Wall Transformer, 24 VAC, 50-60 Hz, 35 VA, 3-pin MOLEX Connector
North America:

TFP 010, UL/CSA

Europe:

TFP 027-01, 2-pin Schuko plug, CE

UK:

TFP 027-02, 3-pin UK plug, CE

Power Cable:

NEC Class 2 wiring, two-conductor, 18 ga., 200’ (61m) max. length

Modulation:

FM Wideband, +50kHz deviation max., 50uS pre-emphasis

Carrier Frequency:

Channel A: Selectable, 2.3/2.8 MHz,
Channel B: Selectable, 3.3/3.8 MHz

Emitter IR Power:

3.5 watts

Coverage Area:

Up to 28,000 ft

(2,600 m

) in single-channel mode when using the RX22-4 Receiver

Up to 11,000 ft

(1,670 m

) in four-channel mode when using the RX22-4 Receiver

Up to 3,500 ft

(325 m

) in single-channel mode when using the RX14-2 Receiver

Up to 3,063 ft

(285 m

) in single-channel mode when using the RX18 Receiver

(See coverage area diagrams)

Signal-to-Noise Ratio:

>75 dB, +3dB

Frequency Response:

80 to 15,000 Hz, electrical response

Total Harmonic Distortion:

Less than .2%, electrical response at 1kHz

Compression:

Music preset 1:1, Voice preset 1.5:1, Hearing Assist preset 2:1

Auto Carrier Shut-Off:

20 minute timer shuts off carrier when no audio is present

WIR TX90 Transmitter:

Power Indicator:

Red LED

Audio Volume Level Controls:

CHA and CHB Input Level, press to select, 28 dB adjustable range

Audio Indicators:

CHA and CHB Audio Level, yellow LED, flash

Carrier LEDs:

2 green LED carrier “on” indicators

Phones Output:

3.5mm TRS headphone jack. CH A tip, CH B ring on jack, 32 ohm headphone (min)

Application Preset:

Music, Voice, Hearing Assist. Frequency response; Music: Flat; Voice: Mid-range
boost; Hearing Assist: High frequency boost

Tone Control:

Press to select, 21 dB adjustable range (1 kHz between low boost/hi-cut and low
cut/hi boost).

Applications:
Cinemas • Simultaneous Interpretation • Audio Description • Conferences • Multi-Media Rooms
Boardrooms • Courtrooms • Schools • Universities • Churches

Fig. 1: TX90 Bottom View:

NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE!

* 90 days on accessories.