Westinghouse NB-14w2 - Manual (Page 62)

■ Chapter 4 Troubleshooting
4-8
Display Problems
The display panel is blank when the system is turned on -
„ Make sure the computer is not in the Standby or
Hibernate suspend modes. The display is turned off to
conserve energy in these modes.
The screen is difficult to read -
„ The display resolution should at least be set to at
least1024x768 for optimal viewing.
„ Go to [Start > Settings > Control Panel] and double-click
the Display icon.
„ Under the Settings page, set screen resolution to at least
1024x768 and choose at least 256 colors.
The screen flickers -
„ It is normal if the display flickers a few times during
shutting down or powering up.