Wyse Technology X90L - Manual (Page 11)

5
5. Using the plastic alignment tool carefully lift up the keyboard (start lifting at the arrow
shown in Figure 7), and then lay keyboard facedown to expose the flash and memory
modules.
Caution
The keyboard is very susceptible to bending so use caution when lifting.
Figure 7 Lifting up keyboard
6. Remove the existing flash module. Locate the flash module and push its retaining clip
out of the way in the direction of the arrow shown in Figure 8. Carefully lift flash module
out of the socket.
Warning
Flash and RAM modules may be susceptible to damage by Electro-Static
Discharge (ESD). All industry-standard cautions should be followed to avoid
ESD. Before you remove or install a modules, touch any metal part of the
chassis and keep that contact with the chassis during the installation
process.
Figure 8 Removing the flash module