Westinghouse WST6003 - Manual (Page 5)

Frost Watch
If your Heater is plugged in and in operation and set at the lowest setting
(the Heater/Fan Dial set to LOW and the Thermostat Dial set to MIN) the
Heater will remain OFF unless the temperature drops below 41ºF. At 41ºF
the Heater will automatically turn ON and will cycle ON and OFF to keep the
area at a constant temperature.
Auto Safety Shut Off
When the temperature rises to an unsafe level, usually due to an obstruction
of the Front Safety Grill or Air Intake, the red Safety Light will illuminate and
the Heater will turn itself OFF. Immediately turn the Heater/Fan Dial to the
OFF position, turn the Thermostat Dial to LOW. Remove the plug from the
outlet and allow the Heater to cool for 30 minutes. If necessary, remove the
object causing the problem; then plug into the outlet and turn the
Heater/Fan Dial. If the Heater’s red Safety Light is still illuminated, call
Consumer Service for authorization for return or repair.
DO NOT USE A MALFUNCTIONING HEATER.
7 4
Heater/Fan
Dial
Thermostat Dial
MIN
MAX
OFF Fan
LO
HI
Amber Power
ON/OFF Light Red Safety
Light
Getting To Know Your Westinghouse
WST6003 Flat Fan Heater
Product may vary slightly from illustrations
Heater/
Fan Dial
Front
Safety Grill
Thermostat
Dial
Amber Power
ON/OFF Light
Red Safety
Light
Air Intake
(not shown)
Top Grill